Sani Pass
Channel

The use of a Sani Pass channel in combination with a proper face mask assists in lowering the risk of cross-contamination when entering a populated space. The channel is equipped with strategically placed misting nozzles that disperse a very fine, dry fog of organic, non-toxic, non-irritant solution to assist in protecting individuals when entering a confined area (indoors and outdoors). Sani Pass is handicap accessible and easily accommodates disabled persons without issues.

Why did we create Sani Pass?

Learn More

Models

We offer three different models of Sani Pass.

M64

M64

Unit for small to medium audience traffic.

Learn More
T96

T96

Portable unit to facilitate remote location operation.

Learn More
L76

L76

Unit for heavy audience traffic with a larger bay.

Learn More

Other Products

More products to keep your staff and customers safe from COVID-19.

Luggage Disinfection Unit FA73

Luggage Disinfection Unit FA73

It is generally expected that there will be a large increase in passenger traffic at airports and railway stations and other public places. Sani Pass proposes a solution to reduce the transmission of viruses and germs through personal items such as passenger luggage and packages at bus/train stations and airports. A tunnel system similar to the X-ray machines used for passenger suitcases at airports has been modified for the disinfection of luggage. The system consists of a series of nozzles omitting a fine, dry fog of a non toxic, non irritant solution disinfecting each square meter area of the item on a conveyor belt.

Learn More
CM-2012 Disinfection Robot

CM-2012 Disinfection Robot

The CM-2012 Robot allows for customized disinfection paths covering every corner of any given room. We have customized the product design according to the actual needs of automated disinfection: High capacity lithium batteries for up to 8h working cycles. LiDAR obstacle avoidance, automatic deceleration, emergency stop button, ultrasonic anti-collision allow operation in populated spaces. Usage helps reduce labor costs and increase efficiency. When power or disinfectant level is low, the unit will automatically return to its charging station.

Learn More
YZ-32 Battery Powered Fogger

YZ-32 Battery Powered Fogger

YZ-32 is a battery powered unit that generates a dry, cold fog. Due to the low weight and the variable droplet size produced by this machine (5-50 microns), it is ideal for general disinfection in schools, buses and other areas of public transport. Using the latest in battery technology, this fogger has been specially designed to produce up to 40 min. of continuous fogging time with only 2,5 hours of charging time. Features include a 2 liter (0.5 gal.) tank and an advanced 12V DC motor.

Learn More
Body Temperature Monitoring System

Body Temperature Monitoring System

The SP_TM01 unit combines AI temperature measurement + mask recognition detection. It adopts Rockchip RK3288 high- performance hardware platform, industrial grade binocular camera and face recognition, as well as infrared thermal imaging technology. Furthermore the unit supports card reading, fingerprint input and other functions, which can be applied to the temperature security and the fast physical examination gate channel to achieve safe and efficient access control. In addition to a wall mount bracket the unit has 3 different pedestal options. (This unit is currently not available for Canadian customers)

Learn More
MZ34 Stationary Office Fogger

MZ34 Stationary Office Fogger

Reopening our economy is the time for disinfection of entire retail spaces and offices to prevent the spread of the coronavirus and other airborne or surface-transmitted pathogens. Disinfection of entire rooms, offices, and public spaces by using a stationary fogger is becoming a necessity in a multitude of residential and commercial applications. As customers are searching ways to limit exposure to pathogens, viruses, and other bacteria we need to bring confidence into public spaces and businesses by killing germs through effective disinfection solutions. This programmable ULV fogger is the right tool to demonstrate to customers and staff that you value the safety of work/ retail spaces.

Learn More
FebriDX® Rapid Test

FebriDX® Rapid Test

FebriDx® Point-of-Care Test Device The first and only rapid, all-in-one point-of-care test device that can identify a clinically significant acute respiratory infection (ARI)and differentiate viral from bacterial causes. FebriDx® can be used to help triage patients at the point of care to reduce uncertainty and avoid unnecessary antibiotics. • Results in 10 minutes increases confidence in whether or not to prescribe an antibiotic. • All-in-one test device allows doctors or nurses to test during triage. • Instrument-free means no expensive equipment and a fully portable solution. • Highly sensitive/specific dual biomarker technology provides reliable differentiation of viral and bacterial infections.

Learn More
More Products

Blog

May 27, 2021

Why Hypochlorous Acid Is The Most Effective Disinfectant for Your Business? A Complete Guide

As the global struggle with the threat of COVID-19 goes on, businesses continue to search for solutions that will help them return to normal. One of the important aspects here is figuring out how to make your public space safe […]

Read More
May 20, 2021

How to Make Public Places Safe from COVID with Full-Body Disinfection Tunnel [Infographic]

Disinfection tunnels, such as disinfection passages offered by Sani Pass, are a novel approach to the fight against COVID-19 spread. These solutions combine several technologies with proven effectiveness like full-body disinfection, hand sanitation, and mask detection. Below is an infographic […]

Read More
April 12, 2021

Post-COVID Shopping Malls: How the Need for Safety Transforms the Shopping Experience

As the world is entering the phase of recovery after the COVID-19 pandemic, industries start looking for the ways to ensure safety of their consumers. Nowhere is this more apparent than in the retail sector, where safety inevitably clashes with […]

Read More
More Posts

FAQ

  • What is the dry fogging process used in Sani Pass?

    High oscillating ceramic plates produce a very fine mist, similar to a dry, heavy fog that is channeled into the unit through a series of nozzles.

    The fine droplets leave no residue and will not harm your hands or facial tissue, clothing or carry-ons.

    The solution becomes temporally affixed to one’s body, clothing and carry-ons to eradicate any viruses and/or bacteria that may be present on the respective surface.

  • Where can I find more information on the solution used in Sani Pass?

    Wikipedia has a very informative chapter on Hypochlorous Acid, please read for further reference: https://en.wikipedia.org/wiki/Hypochlorous_acid

  • How long does the temperature check and cleansing process inside the Sani Pass channel last?

    The entire process is completed in approximately 8-10 seconds per person, depending if mask detection or other features are actioned.

  • What is the correct procedure for using Sani Pass?

    Step up to the touch free hand cleansing wash supplier. Stretch out your hands under the supply nozzle and wait for liquid to be squeezed into your hands. Apply evenly to both hands.

    Look up to the screen for face mask detection/temperature measurement. Upon detection of face mask and normal temperature proceed to chamber.

    Remove all outer clothing, including coats, scarves and hats, and hold in your hands.

    When the nozzles are issuing the dry fog pause for 5 seconds with arms extended at shoulder height in the center of the chamber. After approx. 5 seconds have elapsed proceed to exit the unit and into the venue or area.

  • What happens if someone with a fever or without a face mask tries to enter Sani Pass?

    Depending on the desired programming of the unit either or all of the following scenarios will occur:

    * A visual signal is triggered and the person is asked to step aside by the machine and/or attendant.

    * An audible alarm sounds and the person is asked to step aside by the machine and/or attendant.

    * The automatic doors to the unit do not open preventing the person with fever or without face mask to proceed further into the chamber.

  • How often does the operating staff need to perform maintenance?

    Check and clean the filter every 4-6 days of operation. Refill the hand sanitizer dispenser and solution as needed.

  • What is the weight of the Sani Pass unit?

    Depending on model number about 300kg (660 lbs) per unit dry weight.

  • What is the warranty for Sani Pass?

    A one-year warranty on all parts and labor will be provided subject to the unit's compliance with the operational requirements as set out in the user/operational manual.

  • Are there leasing options for Sani Pass products as well?

    Yes, Sani Pass can offer attractive leasing options in North America for the complete product range as an alternative to outright purchasing.

  • Can a disinfectant be used on humans in Canada?

    No, Health Canada does not permit the use of disinfectants on humans in Canada.

Interested in Sani Pass?

Please complete our contact form or call us at +1 807-699-5048